Cliff,
In a bit of a quandry. When developing my 130 VLD load this spring for the light Pierce in 6.5x47, I ran could not get the 130 Hunting so opted instead for the 130 Target version. That's what I've been shooting all Spring and Summer. Now, i'm getting advice to not use the Target version for hunting since the jacket is heavier (which I knew) and reliable opening at LR could be compromised. I've now got some Hunting 130's and a few more boxes inbound. Out of curiosity, I measure the bearing surface with two Horndady 6.5mm comparators and find that the Target version is .023" longer. I then measure from the base of the bullet to the front of the bearing surface and sure enough; .023" longer for the Target version. I'd read they were identical bullets but the caliper doesn't lie. In the next few weeks after I compete in the Utah State Sniper Shoot, 8-9 Sept, I'll see how my accuracy is. Might have to tweek the load/seating depth to regain the accuracy.
Alan
PS. How's the weather?
Last edited by GSSP; 08/29/12.
