|
Joined: Aug 2010
Posts: 48,090 Likes: 6
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Aug 2010
Posts: 48,090 Likes: 6 |
That’s a great looking rifle.
My only caution would be not so much that they are rough and don’t look so pretty when you get them, but by the time you fill some voids and what have you the ounces can creep up. That's good to know Rick and true. Something guys need to be aware of, for sure..
I try to stick with the basics, they do so well. Nothing fancy mind you, just plain jane will get it done with style. You want to see an animal drop right now? Shoot him in the ear hole. BSA MAGA
|
|
|
|
Joined: Apr 2013
Posts: 3,165
Campfire Tracker
|
Campfire Tracker
Joined: Apr 2013
Posts: 3,165 |
Mine have been pretty consistent at 24-25oz irrespective of barrel and action in letting. But it’s been a couple of years
I’m waiting on an ultra classic from manners right now which I’m hoping will finish under 20oz. It will. I just sold one and it was 18oz in the nose. Incredibly light! Mine was a short action.
Regards, Nick- Georgia
|
|
|
|
Joined: Mar 2007
Posts: 9,097
Campfire Outfitter
|
Campfire Outfitter
Joined: Mar 2007
Posts: 9,097 |
.. Kevlar is for strength not light weight.. not precisely true. Does anyone know how Brown builds their pound’r so light, yet so strong?
IIRC, Kevlar Pounder is layed up differently, being single layer construction. McM. carbon and glass use multi-layer. Kevlar gets it's strength through continuous fibers and I believe Brown's technique employs continuous Single layer. So Kevlar (done correctly) , delivers something unique. in that it provides a combo of lightweight, strength-durability and stiffness, that you won't get from carbon or glass in single layer or at the same weight. NULA stocks are Kevlar reinforced with carbon, just like Brown uses carbon to stiffen their stocks. from Brown Precision:
Brown Precision utilizes both Kevlar and graphite in the forearm and other strategic strength areas of all of its fiberglass stocks.
Graphite,..... We highly recommend adding extra graphite to the forearm of a fiberglass or Kevlar stock. It assures that you have the stiffest, toughest stock available.
Kevlar is a super strong, lightweight material... The main advantage to Kevlar is that the stock is 3 to 4 ounces lighter and stronger than even our fiberglass stock.
-Bulletproof and Waterproof don't mean Idiotproof.
|
|
|
|
Joined: Oct 2007
Posts: 14,267
Campfire Outfitter
|
Campfire Outfitter
Joined: Oct 2007
Posts: 14,267 |
Anyone know if the standard stocks are weighing in a little more too? Just curious if all the stocks are a little heavier or just the edge fill? Yes, they are.I have some earlier ones that weigh 32 -34 oz.Now they are 2 1/4 to 2 1/2 pounds.
Its all right to be white!! Stupidity left unattended will run rampant Don't argue with stupid people, They will drag you down to their level and then win by experience
|
|
|
|
Joined: Nov 2010
Posts: 37,136 Likes: 1
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Nov 2010
Posts: 37,136 Likes: 1 |
Getting them to finish and paint puts it out of my comfort zone.
Getting the inletted blank, doing the work myself keeps it in my price range.
Paying a premium for that last 5-6 oz.
DF
|
|
|
|
Joined: Mar 2007
Posts: 9,097
Campfire Outfitter
|
Campfire Outfitter
Joined: Mar 2007
Posts: 9,097 |
I was looking to buy a Pounder in 1989 for my .300 Roy, and 30 yrs later nothing has changed in that BP still only offers the two options of; a rough blank or totally finished product. There are a few of us who’ve spoken with Echols... I know for a fact he’s frustrated with McMillan making stocks that aren’t the same way each and every time.
D'Arcy has McM do the inlet for a customers order, but experience has taught him to have them sent to his shop for inspection prior to being sent to the customer.
-Bulletproof and Waterproof don't mean Idiotproof.
|
|
|
|
Joined: Nov 2010
Posts: 37,136 Likes: 1
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Nov 2010
Posts: 37,136 Likes: 1 |
Totally finished is too much for me. I may could justify an inletted blank.
I’ve had a good bit of experience with McM. I get them inletted, do the glass work, return for paint. Just costs shipping one way.
DF
|
|
|
|
Joined: Sep 2004
Posts: 2,701
Campfire Regular
|
Campfire Regular
Joined: Sep 2004
Posts: 2,701 |
I was looking to buy a Pounder in 1989 for my .300 Roy, and 30 yrs later nothing has changed in that BP still only offers the two options of; a rough blank or totally finished product. There are a few of us who’ve spoken with Echols... I know for a fact he’s frustrated with McMillan making stocks that aren’t the same way each and every time.
D'Arcy has McM do the inlet for a customers order, but experience has taught him to have them sent to his shop for inspection prior to being sent to the customer. As well it should. A good friend recently paid to have his barreled action inlet when he ordered his stock. Got it back and it left a lot to be desired! For what it cost, it should have been perfect!
|
|
|
|
Joined: Jun 2009
Posts: 3,188
Campfire Tracker
|
Campfire Tracker
Joined: Jun 2009
Posts: 3,188 |
I’ve had a good bit of experience with McM. I get them inletted, do the glass work, return for paint. Just costs shipping one way.
DF This is the way to go on Micky’s IMO. I also no longer order finished stocks. I always ended up having to do something to the barrel channel or bottom metal inlet to get it right, then trying to match their paint. PITA. Inlet the bugger, I’ll tweak the fit and bed, send back for paint.
Stuck in airports, Terrorized Sent to meetings, Hypnotized Over-exposed, Commercialized Handle me with Care... -Traveling Wilbury's
|
|
|
|
Joined: Nov 2010
Posts: 37,136 Likes: 1
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Nov 2010
Posts: 37,136 Likes: 1 |
Whoever inletted the Legand stock I used for my 404J Williams bottle metal did a perfect job. Didn’t know he used McM, but it was perfection. Dropped in with zero gap. Top side inletting was as good.
McM says mag fill for the .404J. Got it std fill with pillars and cross pins. D’Arcy said that would work. It did, but I did Steel Bed the recoil lug. I used a SS M-70 300 RUM for the donor. Worked out well.
D’Arcy is very easy to work with, is a stickler for details and quality.
DF
|
|
|
|
Joined: Nov 2002
Posts: 33,721 Likes: 2
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Nov 2002
Posts: 33,721 Likes: 2 |
Not BSA, but the last Pound’r I bought the blank was 15.8 ounces. 22 ounces finished. You know this, but the guy doing your stock work needs to be careful with the Bondo otherwise the brown kevlar can gain some weight. Brown blanks are pretty rough! Exactly what mine weighs on my 375 H&H M70.
Conduct is the best proof of character.
|
|
|
|
Joined: Mar 2007
Posts: 9,097
Campfire Outfitter
|
Campfire Outfitter
Joined: Mar 2007
Posts: 9,097 |
Edited to add: the last BP stocks I ordered, a Kevlar and a fiberglass, my leaky memory recalls that they were about 5 ounces difference in weight as blanks.....Kevlar is definitely stiffer, but you could argue that being stiffer it doesn’t soak up recoil as well as fibreglass which theoretically flexes a bit...
Mr.Brown himself talked me out of Kevlar by suggesting he could go through his inventory of glass blanks and find one that was lighter than normal. (ie: take advantage of variation in weights that occur in production) Basically he said you can reduce the diff to a couple ounces and save yourself the hassle of trying to finish a Kevlar blank. I took his advice and also requested 'extra carbon' option in the forearm.. The blank was impressively light and stiff. (but had they offered a filled/primed Pounder option, I would have got one). The pad I fitted was a Pachmayr 500B the lightest thinnest I could find at the time. (approx 6 oz. before grinding) Now days you can get these 2 Oz. babies! https://www.hastingsdistribution.com/index.php?l=product_detail&p=60Re: recoil/stiffness, Kevlar is a compromise between carbon and glass [ less elastic than glass but more elastic than carbon] while having higher strength than both. ***** Although we often discuss different composite fibres, what is usually ignored are the type of resins used. Depending on whether one uses vinyl-ester (modified epoxy) or polyester, mechanical properties like elasticity will vary. Vinyl ester resins are a polyester backbone molecule with an epoxy component and considerably more elastic. composite technology is always improving-changing but we don't see it in rifle stocks.
-Bulletproof and Waterproof don't mean Idiotproof.
|
|
|
|
Joined: Nov 2010
Posts: 37,136 Likes: 1
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Nov 2010
Posts: 37,136 Likes: 1 |
Thanks for the Hastings link. Looks interesting.
DF
|
|
|
|
Joined: Mar 2006
Posts: 20,899 Likes: 1
Campfire Ranger
|
Campfire Ranger
Joined: Mar 2006
Posts: 20,899 Likes: 1 |
McMillan aint the only game in town
"I never thought I'd live to see the day that a U.S. president would raise an army to invade his own country." Robert E. Lee
|
|
|
|
Joined: Sep 2002
Posts: 3,324
Campfire Tracker
|
Campfire Tracker
Joined: Sep 2002
Posts: 3,324 |
Mr.Brown himself talked me out of Kevlar by suggesting he could go through his inventory of glass blanks and find one that was lighter than normal. (ie: take advantage of variation in weights that occur in production) Basically he said you can reduce the diff to a couple ounces and save yourself the hassle of trying to finish a Kevlar blank. I took his advice and also requested 'extra carbon' option in the forearm.. The blank was impressively light and stiff. (but had they offered a filled/primed Pounder option, I would have got one). That must have been my luck! I have a std. Brown on my .338 Win Mag that I have hunted hard for the past 19 yrs and I have had zero issues. I have had a few rodeos in the mtns a few times and that stock is still rock solid! My Brown stock painted, bedded with pillars and a 1" Decelerator weighs 26 ozs. I guess I got lucky for once. Here is a couple pics: https://www.24hourcampfire.com/ubbthreads/ubbthreads.php/galleries/14915584#Post14915584
PASS IT ON!
|
|
|
|
Joined: Nov 2007
Posts: 29,648 Likes: 5
Campfire Ranger
|
Campfire Ranger
Joined: Nov 2007
Posts: 29,648 Likes: 5 |
Is there a specific manufacturing claim that McMillan is not meeting?
Yes: “ Stock weighs 22-26 ounces depending on action cut out.” https://mcmillanusa.com/product/hunters-edge-remington/
|
|
|
|
Joined: Jan 2008
Posts: 5,467
Campfire Tracker
|
Campfire Tracker
Joined: Jan 2008
Posts: 5,467 |
Even Greyboe now offers a lightweight stock that they say weighs 25 ozs! You would think the Edge stocks could do better??? https://grayboe.com/shop/lightweight-25oz-outlander/
Last edited by Oregonmuley; 05/27/20.
"Rather hunt Mule deer than anything else" "Team 7MM-08"
|
|
|
|
Joined: Jun 2005
Posts: 2,631
Campfire Regular
|
Campfire Regular
Joined: Jun 2005
Posts: 2,631 |
How would you rate High Tech Specialist / LAW (Legendary Action works) stocks?
In weight and strength?
The US in the last 40 years:
Socialism for big corporations and military industrial complex
&
Rugged individualism for the individual.
|
|
|
|
Joined: Oct 2008
Posts: 7,263
Campfire Tracker
|
Campfire Tracker
Joined: Oct 2008
Posts: 7,263 |
Didn't McMillan run a statement that there was no edge fill any longer only standard. Or was it that there wasn't an edge fill. Sorry if this was posted previously didn't read the entire thread.
"When you disarm the people, you commence to offend them and show that you distrust them either through cowardice or lack of confidence, and both of these opinions generate hatred." Niccolo Machiavelli
|
|
|
|
610 members (10Glocks, 160user, 12344mag, 10gaugemag, 10ring1, 007FJ, 65 invisible),
2,504
guests, and
1,342
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,192,203
Posts18,485,345
Members73,966
|
Most Online11,491 Jul 7th, 2023
|
|
|
|