|
Joined: Jan 2019
Posts: 945
Campfire Regular
|
Campfire Regular
Joined: Jan 2019
Posts: 945 |
|
|
|
|
Joined: Mar 2003
Posts: 5,844
Campfire Tracker
|
Campfire Tracker
Joined: Mar 2003
Posts: 5,844 |
I use a simple torch and roll the case in my fingers for a fixed time, at a fixed position in the flame. Certainly not the most sophisticated or consistent method, but it prevents split necks and neck tension is consistent enough that my groups and velocity dispersion are small enough for my needs.
+1 Sometimes we get to overthinking things.
Chronographs, bore scopes and pattern boards have broke a lot of hearts.
|
|
|
|
Joined: Mar 2005
Posts: 26,253
Campfire Ranger
|
Campfire Ranger
Joined: Mar 2005
Posts: 26,253 |
So then MD and some other guys are all wet when it comes to using the cheap, but useable candle method? Or. do you just feel the need to spend money? To speed things up a little, I do the torch, finger, 5 second deal. Roll the heated brass on my cool cement floor. YMMV Last I knew I believe John said he used the Anneal-Rite. Have you tried the candle method with 750 degree Tempilaq on the inside of the neck?
Casey
Not being married to any particular political party sure makes it a lot easier to look at the world more objectively... Having said that, MAGA.
|
|
|
|
Joined: Apr 2004
Posts: 3,461
Campfire Tracker
|
Campfire Tracker
Joined: Apr 2004
Posts: 3,461 |
No..use the 4-5 second finger heat method.
I also like to "feel" the neck resistence when I pull the dreaded expander ball through the neck when resizing. Smooth and even, I`m happy. Produces ammo that shoots well.
|
|
|
|
Joined: Apr 2004
Posts: 42,803 Likes: 1
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Apr 2004
Posts: 42,803 Likes: 1 |
I learned this from Fred Flintstone.....
I hold a case in a propane torch flame for 6 seconds with a pair of needle nose pliers...
Nowadays I do it ever reload..... so far 6.5 Grendel brass from Hornady has exceeded 25 reloads now... and I don't consider Hornady a real great brass....
Years ago after reading Lapua's web site, I read to where they got over 300 loadings from their brass at the factory testing stuff..
so I took 10 pieces of range brass in 223, and reloaded them over and over with 55 gr FMJs ... and annealing for 6 seconds in a propane torch flame for 6 seconds every 4th reloading....
Remington range pick up brass....I quit the experiment at 101 loadings...
Neck size and body die for resizing....
nothing fancy but it is giving me long service life out of my brass and none of it is Lapua...
just a little prudence on the powder scale and that also can dramatically extend brass life out quite a bit...
"Minus the killings, Washington has one of the lowest crime rates in the Country" Marion Barry, Mayor of Wash DC
“Owning guns is not a right. If it were a right, it would be in the Constitution.” ~Alexandria Ocasio Cortez
|
|
|
|
Joined: Dec 2008
Posts: 2,385 Likes: 3
Campfire Regular
|
Campfire Regular
Joined: Dec 2008
Posts: 2,385 Likes: 3 |
I use a simple torch and roll the case in my fingers for a fixed time, at a fixed position in the flame. Certainly not the most sophisticated or consistent method, but it prevents split necks and neck tension is consistent enough that my groups and velocity dispersion are small enough for my needs.
If you loaded 1000 cases and annealed them with this method, why not just spend a couple hours at work and the overtime pay would allow you to buy 1000 rounds of brass and just keep reloading and throw away the cases when they get a split neck. It would save enough time and the accumulation of brass without split necks would give you enough brass, you could let them fly out on the ground and not even pick them up. https://www.24hourcampfire.com/ubbt.../re-once-fired-fc-223-brass#Post15773699
I was thinking the other day how much I used to hate Bill Clinton. He was freaking George Washington compared to what they are now.
|
|
|
|
Joined: Mar 2006
Posts: 14,510
Campfire Outfitter
|
Campfire Outfitter
Joined: Mar 2006
Posts: 14,510 |
I agree that you have to consider volume, cost, and availability when deciding if annealing is worth it. If using range pickup brass in an AR, maybe you just reload them until the necks split or need to be trimmed and then throw them out and get more. But on the other hand, 100-200 rounds of Lapua or Alpha brass will last as long as most barrels, if annealed every few firings, and it is very good brass. At $100+ per hundred and limited availability, I want to make that stuff last as long as possible, and will spend the money on powder and bullets instead of new brass after just a few firings.
|
|
|
|
Joined: Jan 2008
Posts: 7,722
Campfire Outfitter
|
Campfire Outfitter
Joined: Jan 2008
Posts: 7,722 |
That’s why I’m going borrow my friends bench source and get my own when available again. I still use a few Ackley chamberings and prep my cases. So I’ll anneal to extend the life of those cases due to my labor as well as my expensive brass.
|
|
|
|
Joined: Mar 2005
Posts: 26,253
Campfire Ranger
|
Campfire Ranger
Joined: Mar 2005
Posts: 26,253 |
I agree that you have to consider volume, cost, and availability when deciding if annealing is worth it. If using range pickup brass in an AR, maybe you just reload them until the necks split or need to be trimmed and then throw them out and get more. But on the other hand, 100-200 rounds of Lapua or Alpha brass will last as long as most barrels, if annealed every few firings, and it is very good brass. At $100+ per hundred and limited availability, I want to make that stuff last as long as possible, and will spend the money on powder and bullets instead of new brass after just a few firings. This^^^ And.....given the Panic Pandemic new brass ain't necessarily easy to come by. And.....a lot of brass isn't annealed from the factory, and by annealing it makes it easier to get straight necks (I've proven this to myself) and more consistent neck tension. Reloading isn't (usually) a chore to me and I enjoy it--it's a hobby within a hobby, and a lots of methods can be employed to make more accurate ammo.
Last edited by alpinecrick; 02/13/21.
Casey
Not being married to any particular political party sure makes it a lot easier to look at the world more objectively... Having said that, MAGA.
|
|
|
|
Joined: Dec 2018
Posts: 134
Campfire Member
|
Campfire Member
Joined: Dec 2018
Posts: 134 |
I really can't justify the cost of annealer, I use the candle method which has worked well, but I'd agree the soot is a problem. I've also the torch, but basically eyballed the colour change in the brass neck and shoulder, then dump them on a wet towel. Nothing to do with quenching, just how I do it and seems to work.
|
|
|
|
Joined: Feb 2014
Posts: 2,621
Campfire Regular
|
Campfire Regular
Joined: Feb 2014
Posts: 2,621 |
I posted a question related to your post over in the Gunwriters Forum a few days ago and received some great answers that really helped me think about Annealing in a more complete way. I had many questions that you might have as well. https://www.24hourcampfire.com/ubbt...-life-can-one-really-expect#Post15805487Tim
Last edited by PintsofCraft; 02/24/21.
|
|
|
|
Joined: Apr 2004
Posts: 42,803 Likes: 1
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Apr 2004
Posts: 42,803 Likes: 1 |
I use a simple torch and roll the case in my fingers for a fixed time, at a fixed position in the flame. Certainly not the most sophisticated or consistent method, but it prevents split necks and neck tension is consistent enough that my groups and velocity dispersion are small enough for my needs.
If you loaded 1000 cases and annealed them with this method, why not just spend a couple hours at work and the overtime pay would allow you to buy 1000 rounds of brass and just keep reloading and throw away the cases when they get a split neck. It would save enough time and the accumulation of brass without split necks would give you enough brass, you could let them fly out on the ground and not even pick them up. https://www.24hourcampfire.com/ubbt.../re-once-fired-fc-223-brass#Post15773699Try to buy 1000 cases now under Biden & Harris....
"Minus the killings, Washington has one of the lowest crime rates in the Country" Marion Barry, Mayor of Wash DC
“Owning guns is not a right. If it were a right, it would be in the Constitution.” ~Alexandria Ocasio Cortez
|
|
|
|
Joined: Apr 2004
Posts: 42,803 Likes: 1
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Apr 2004
Posts: 42,803 Likes: 1 |
I agree that you have to consider volume, cost, and availability when deciding if annealing is worth it. If using range pickup brass in an AR, maybe you just reload them until the necks split or need to be trimmed and then throw them out and get more. But on the other hand, 100-200 rounds of Lapua or Alpha brass will last as long as most barrels, if annealed every few firings, and it is very good brass. At $100+ per hundred and limited availability, I want to make that stuff last as long as possible, and will spend the money on powder and bullets instead of new brass after just a few firings. This right here..^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ want not, waste not, with the nation under lying cheating DemocRATS running the nut house in DC...
"Minus the killings, Washington has one of the lowest crime rates in the Country" Marion Barry, Mayor of Wash DC
“Owning guns is not a right. If it were a right, it would be in the Constitution.” ~Alexandria Ocasio Cortez
|
|
|
|
587 members (10Glocks, 1badf350, 1lesfox, 1936M71, 10gaugemag, 12344mag, 60 invisible),
2,518
guests, and
1,439
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,192,194
Posts18,485,016
Members73,966
|
Most Online11,491 Jul 7th, 2023
|
|
|
|