Originally Posted by DINK
Originally Posted by Pat85
80.5 grains of h1000 . 180 grain accubond out of a 75 bedded in a Macmillan stock.


Thanks.

I tried 81.0 grains of H1000 with 180 grain partitions and it would only do a 1 to 1.25 inches for a three shot groups. Same powder with 165 grain partition groups in a ragged hole.

I just loaded some 180 grain BT's with H1000. Maybe that will get me to .5.

Dink


I was getting 3" groups at 300 with that load. Decided to bed the action to see if it would tighten up a little.