I have 50 Nosler +P cases on order. Not cheap!
In a strong action, I don't see a problem running +P loads with std. brass. I want to weigh these +P cases and std. cases.
On another note, I've been using a Lee FL sizer, producing rounds with too much runout. I was able to straighten them somewhat with the Tru Tool and a Sinclair concentricity gauge.
I have a Lee Collet sizer on order. I'm thinking about taking that sorry Lee FL die, grinding out the neck, removing the decapping stem, turning it into a shoulder set back die. It should be able to do that if I can get the neck ground large enough to clear the case neck.
Will report. That would be cheaper than buying a Redding Body Die. When using a neck sizing die, you need a body die to occasionally set the shoulder back for easy bolt closure.
The Lee Collet neck sizer produces some of the most concentric ammo I've ever loaded, and I do have some fancy comp type dies.
DF
