Originally Posted by Gies340
Jeff O -
would love to see the progress. I'm 55 shots down my GAP Non-Typical in 6.5 SAUM - basically Xtreme with floor plate and B&C stock that I like tons.

Just so happens that I drew my Wyo Sheep permit on the 17th try so we'll see how she does in the back country in 3 weeks. Love the gun and caliber. Right now I'm a bit slow it seems to some of the other numbers posted.

61.5 H1000 and 140 VLD hunting = 3020 fps. But, I'm punching several honest 1/2" MOA groups at 100 and I'm no benchrest shooter.


You must be out hunting! Be sure to report back.

Progress... I'll definitely update as I go. I got the BARE action and PT&G bolt on hand now. I'll probably blueprint the action next week. I made a couple bolt knobs just to have something to do, a small stainless one and a bigger aluminum one. These are making the aluminum one:

[Linked Image]

[Linked Image]

.... and then polishing it:

[Linked Image]

I made it with my radius turner on a 5/16" mandrel. Radius turners combined with tapers will MESS with your head!

Looks like this, and there's the smaller stainless one too:

[Linked Image]

Finally, Remington is putting different marking on their receivers now... weird.

[Linked Image]

I'll take some pics when I'm truing up the action. That'll be fun.

The CENTER will hold.

Reality, Patriotism,Trump: you can only pick two

FÜCK PUTIN!