Shot my LH Tikka 6.5 CM today with a 3 X 9 SWFA scope accurate , but velocity is slower than any 22" barrel 6.5 Creed Moor I have loaded for?
Showing pressure so probably at max. Any one else chrono there new 6.5 Cr Moor Tikka,s? And if so please post velocity and load. Alpha brass is heavier than Hornady so a reduced load has higher velocity.
CCI 200 Alpha RL 26 143 Horn ELDX 45 Gr 2540 FPS 45.5 2540 46 GR 2649
CCI 200 Alpha RL 26 147 Horn ELDM 45 Gr 2516 45.5 GR 2610 46 GR 2662 46.5 Gr 2648 GR
CCI 200 Alpha RL 26 45.5 GR 143 Horn ELDX 2613 3 @ .696" 4 @ 1.1"
CCI 200 Alpha RL 26 46 GR 143 Horn ELDX 2663 3 @ .617" 4 @ .92" Show pressure 45.8 prob max w Alpha Brass tr
CCI 200 Alpha RL 26 45.5 GR 147 Horn ELDM 2629 4 @ .956 3 @ .573" 1 sticky 45.3 prob max with 147 Gr & Alpha
CCI 200 Horn RL 26 46 GR 147 Horn ELDM 2570 4 @ 1.26"
CCI 200 Horn RL 26 46.5 GR 147 Horn ELDM 2585 4 @ .94" Accurate but slow try diff primer maybe mag?
CCI 200 Horn RL 26 47 GR 147 Horn ELDM 4 @ 1.75"
Your loads are right in line with quickload velocities. What is the water capacity of your cases? If it's 50gr of water then your load of 46grs is only operating at 45k pressure. To get anywhere close to 60k you need to get to 49.7grs ol rl 26.
