Originally Posted by Fireball2
Originally Posted by tndrbstr
Originally Posted by Fireball2
This is what's wrong with "sets". Look at everything that *isn't sockets. 450 piece "mechanics" tool set LOL

https://www.walmart.com/ip/Craftsman-450-Piece-Mechanic-s-Tool-Set-With-3-Drawer-Case/306810580?wmlspartner=wlpa&selectedSellerId=18581&&adid=22222222227257198479&wl0=&wl1=g&wl2=c&wl3=304843959100&wl4=aud-430887228898:pla-547777755321&wl5=1024512&wl6=&wl7=9033114&wl8=&wl9=pla&wl10=125198127&wl11=online&wl12=306810580&veh=sem


I wished I had the fore site to know what I will never need when it comes to working on stuff. Then I could just use a bigger hammer on that torx screw.....


If you've done things your whole life, you know what you use and what you don't. Also, one set of some things is fine for the occasional use they get, while other things, like combination wrenches and socket sets, need to be in every truck. Oil filter wrenches- do you need one in every truck or just one of each size in the shop?

It's for each to decide what they need. Some need none.
Just pound a screwdriver through the old filter with a hammer. Tighten the new one up best you can with your paws and then add oil if it leaks a little. lol

By my experience it don't matter how many oil filters, filter wrenches, etc. that you have, none of them will fit, especially if you change from Fram to Wix or whatnot.