Home Forums Hunting & Shooting AR and Tactical Rifles Y'all reloading your 5.56 brass

Oakster,
My comments regarding swaging were in reference to the RCBS press mounted swager. It just never quite did the job for me; too slow and not uniform results. I just acquired a Dillon 600 and processed some Lake City brass with it but I haven't had a chance to start reloading any of it yet.
I will say that while it is a faster process than swaging with the RCBS unit, it still isn't as fast as reaming and chamfering in one operation with the Hornady reamer chucked into a drilL, like I was using.
I did put a slight chamfer on the brass I swaged with the Dillon 600 using an RCBS hand-held deburring tool.

Hornady primer pocket reamer


RCBS deburring tool