UPDATE:
I still haven't made it up to OR to pick up the slabs, what with all this ridiculous Kung Flu crap, but I have another question for another project:
What is a good type of planer to use on edges, i.e. the edges of a red oak plank .75" thick. I guess the old Stanley planers are some of the best.
Also, can anyone recommend a plane blade sharpening jig that doesn't cost an arm and a leg? While I was in Big D, I was working on a project for my folks that required a ~ 1" - 1.5" wood chisel and Dad's chisels are all beat to hell, so I had to sharpen one by hand. I started with "0" grit, b/c the edge was pretty beat up and the bevel was concave for some reason. I worked my way up to 1500 wet on a slab of glass, but it was all hand sharpening, which took well over an hour. I did a respectable job as it was shaving sharp, but it certainly could have been easier and faster with a jig of some sort. Near wore my thumb clean off trying to hold the angle steady.
High Noon, If you were going to come through Wyoming a friend of mine has a planer that would do that job for ya.
