This the .460 Rowland version of the same QuarterCircle10... I built 8 uppers from four $100+/- Green Mountain blanks (four as 45acp 8", 10", 16" and 18" and four as 460 Rowland 8", 10", 16" and 18") IIRC. This was 5 or so years ago.
45acp loads up to 260 grain bullets (subs)... quiet enough that no ear protection is required with a Lane 458 can.
460 Rowland loads were only done (by me) as Nosler 185 grain JHPs (I was seeking speed... 1,760 FPS in the carbine as best as I recall). That math is about .44 RM stuff on delivered energy. The brass is one and done at the load levels I play with.
I like Kriss, but they are expensive to run experiments on...
Video was more function checking at RF speed than shooting for accuracy.
I would hunt with .460 Rowland.
KCI mags suck in many Glocks 21s, but do OK in the QC10s... BTW.
You would hunt with the 460? Why?
I mean I kill deer etc... all the time with a 10mm Glock 20 and have taken a few with 9mm and one with a 380. Yes I'd hunt with the 460. Carry an FN quite a bit at times. And the 45 acp loads too. Plus this and that....
We can keep Larry Root and all his idiotic blabber and user names on here, but we can't get Ralph back..... Whiskey Tango Foxtrot, over....
