I'm unsure about the synthetic stock RCM, but did anyone notice that the wood stock RCM is CNC inletted to free float the barrel? All of my previous Rugers had a forend pressure point, this one does not. I can slide a dollar bill the length of the barrel channel to the contact pad that extends 2 inches beyond the receiver. I checked the factory torque on my action screws and they were 70in-lbs front, 40in-lbs middle, and 30in-lbs rear. Odd combination which probably accounts for the binding mag box. I picked up some sleeve pillars to install and I'll bed the action along with adding a second cross pin. I think she's going to work out well!
Later
