Are the problem rounds that stick very close to the COAL of the magazine? I accidentally loaded some 223 to 2.885 instead of 2.855 COAL (ogive, Hornady tool). The third one stuck, my previously loaded ones had not stuck. Checked COAL from tip to base and figured out my mistake. But sometimes even plastic tipped bullets will vary in COAL (from tip to base) enough to get stuck in the magazine if running close to magazine COAL. I check all the rounds to make sure they all function through the magazine. I do believe that this magazine could stand a redesign and better execution.


Ed

A person who asks a question is a fool for 5 minutes the person who never asks is a fool forever.

The worst slaves are those that put the chains on themselves.