Home Forums Hunting & Shooting Bowhunting Bow tuning "how to"

When I get back in from work, we'll put the Invasion back on the tuning fixture and check cam pre-lean(the setting that should yield us zero cam lean at full draw). We will also put the bow on the draw board. Record actual measured AMO(Archery Manufacturers Organization) draw length, check cam timing, and check cam lean at full draw. Once cam timing is set(both draw stops touching at exactly same time), go back to tuning fixture and verify proper nock height. I'll cover how to tie a d loop and install tie on nocking points. These eliminate nock pinch.