Home Forums Hunting & Shooting Bowhunting Bow tuning "how to"

The levels are "RS Levels". Know Cabelas stocks them on the shelves. At least the one down here does. They are also available from Lancaster Archery. Your local shop should be able to order them also. Set should run ~$25. As for adjusting nock height, the tie in points can be done and left a tad bit loose. I tie them in. Then place bow back in the vise and level/plumb the string. Then nock and level arrow. Slide the top tie in nock down the string until it touches arrow and arrow is either dead level or desired amount nock high. Keep arrow in position and tighten tie in nock. This takes practice and a third hand would be helpful. Once top nocking point is secured, move bottom one into place(i like a couple wraps of the center serving visible between bottom of arrow nock and tied in nock to prevent nock pinch) and cinch down. Snip and burn tag ends. After tied in nocking points are secured, tie d loop