Besides the ejection issues it won’t feed the last round in the clip.
Can you elaborate on this. Do you mean it won't feed the last round loaded i.e. with a full magazine, or it won't feed with just one round in the magazine? If it's the former it's an easy fix that was addressed shortly after the 84M Hunter debuted at the SHOT show. If it's the latter please take a photo of the case head presentation with just one round in the magazine. Simply remove the bolt, insert a loaded magazine and look down the bolt hole. The magazine was designed to place the case head in the "perfect" position with the top of the primer barely visible at the bottom of the bolt hole providing as much of the case head as possible to the bolt face. Hunter rifles have significantly more case head presentation than any of the blind or trap door magazine variants from Kimber. If the magazine spring isn't defective, or the feedlips haven't been deformed due to the magazine being dropped there's no way for the bolt not to strip a round from the magazine.
