Originally Posted by milespatton
Quote
I use the Lee trimmer, which I found does not quite get the cases cut down to recommended length.


Not sure which Lee trimmer you are talking about, but if it is the one where the pilot screws into the cutter, make sure it is screwed all the way in. I have had that problem with some. The threads get real tight right before it goes all the way in. miles


Yes, that's the one. I thought that might be the case at first, because normally I find Lee trimmers to actually cut further than recommended. I went ahead and filed off a tad and now I am getting the 2.025" cut recommended. I will say, the metal is soft so if someone was to try this they want to go slow. A few thous is not much with a file.