My goal with reloading for this rifle is to get as close to the POI as the factory rounds are. I originally zeroed the scope for them, so I figure if I can get close to the same POI, with the same weight bullet, then I will be matching the trajectory close enough. Understanding differences in bullets do matter in the long run.
Regardless, the POI for the factory rounds is right around 1" at 100 yards. So thats what I am going for. In the third picture, which is where I tested the 4451 yesterday, I want to say the 46.5 grain is going to be pretty close to what I want. Except I don't know what to make of that flier.
The first picture is when I tested H414, and there is one that shows some promise there also.
There are other groups that are also showing promise, but the POI is just too low and the ones I did get velocity readings on showed them around 2400 fps. That would be fine for close up work, but I know the gun is capable of more than that.
