Originally Posted by Jiveturkey
Originally Posted by bsa1917hunter
Originally Posted by TWR
I'm assuming you're shooting 3 shot groups and here's the thing, unless you're getting a one hole group at 50 yards, you don't know if you're dead on.

Look at the groups above, those look great until you consider all 3, 3 shot groups are in different spots. Overlap them and they're over an inch. (no offense Ted) That's why 10 shot groups are better at telling what's going on. Trying to call zero off a 50 yard group is useless past that range.

Zero at 200 then shoot at other distances and see where you hit, right the results down.

Or zero at 100 yards and do the same because unless you're only concerned with getting hits somewhere on a full sized silhouette, you need to forget the 25, 50 or even the 36 yard zero. You need to know exactly where your gun hits at the distances you want to shoot in the conditions you are in.


I'm glad you said it. 3 shot groups are useless. Especially at 50 yards. It should be 1 hole at that range with a good rifle. 5 shot groups at 100 yards and further are much better, because you can see anomalies in group dispersion and gives you a better idea on seating depth etc. Then step it up to at least a 9 shot group. I generally run 10, just to be safe and that was the criteria on the black rifle and MOA all day long challenge here. That's the only way you are going to know what the rifle and shooter is fully capable of and where your true POI is. Just about anyone can pull off a tiny 3 shot group with a 1.5 moa rifle. You are giving the op some good advice and at least he told us what barrel he's using now, but everything matters when it comes to how accurate you can make an AR. Non freefloating hanguards are a small ding, so subtract for that. How much, who knows because every rifle reacts differently to that. Using chidt ammo is a huge detriment in accuracy. Scope mount? Cheap unproven scope. Those are still some unknowns. The trigger is a known and that is also subjective to each individual shooter. One guy may shoot a heavy trigger rifle just fine, where another is more nit picky about such things. Other guys hitting on some great things like wind and using wind flags. I'm guilty of not using them lately, but have been thinking about doing so since I've been working on my precision BCM build. Lately the wind has been blowing hard enough to rock my target stand and its a heavy stand. Wind pushes those bullets around enough to open up those groups.

I got a Timney impact trigger today. Installed this evening & I got 3.5 - 4 lbs with my cheap wheeler brand trigger gauge. I'm going to try it again 1st chance I get actually setting the scope for 200 yards. I know I can get somewhat better results than the other day, I just wasn't very steady. All the ammo I have is fmj. Mostly federal America eagle, quite a bit of frontier, & also some Winchester m855 which I have never shot. I will try again & report back with results.


Nothing wrong with plinking ammo buddy, just don't expect it to group real well out of any rifle. I'm talking your standard military 55gr fmj stuff. Every once in a while you'll find something that shoots well in the fmj variety, but it's not the norm. One of my buddies has a stock pile of M855 62gr green tips that his old Bushmaster National match loves. By love, I mean it shoots 2" groups at 100 with him behind the butt and with iron sights to boot. That is 5 shots per string. I'm lucky to get that with my precision handloads out of my old Colt pre ban using irons and 10 shots per group. Moral of the story, if you are concerned about accuracy, buy or load some better bullets or like MM suggested, build yourself a precision rifle. I was at the range yesterday with a friend and 2 guys showed up with some very nice AR's. One guy had just put a 22 Nosler Proof Research barrel on his rifle and he was testing out some loads. After he got it dialed in, he was shooting some nice 1 1/4" 5 shot groups, but this was with good ammo and bullets. He was shooting well enough that I snuck the BCM back into its case and had to pull the Northtech Defense out.. I keep most of the shots in the orange with that rifle, no matter how fast I'm shooting. The BCM will eventually come around, I hope.. Also, your new trigger should help. What I'm reading about the impact is it should be a 3 pound pull single stage. Should work fine, just don't hear much about them here. I personally prefer the 2 stage match triggers, but those are catered more towards precision rifles. Nothing wrong with a good single stage trigger though..


Originally Posted by raybass
I try to stick with the basics, they do so well. Nothing fancy mind you, just plain jane will get it done with style.
Originally Posted by Pharmseller
You want to see an animal drop right now? Shoot him in the ear hole.

BSA MAGA