Thank you VarmintGuy
Yes, so far its a good deal. Like I said though, I'm very leery of it being a "good not great" that holds me back from an Anschutz. We'll see how that works out....
So, about the tight chamber:
I would clean it "with extreme prejudice" ha ha and see
1. If it looks anything less than smooth.... because if it doesn't look smooth then it probably has a high enough microfinish that it can both be grippy on brass and collect fouling. Think tiny tiny sandpaper but made out of steel.
2. If there's any sort of a sharp edge or an edge burr at the chamber mouth.
3. Find out what a truly snug fired case mic's at all the way around, not just 1 measurement. Then compare that to the published specs on the various chambers to see if you have plenty of room to polish a little and still have a nice "match" chamber.
Last edited by kragman1; 01/07/20.
