Sea foam deep creep, anybody use this stuff to break down gunk?
Can spray the top of a piston, and wipe burnt carbon away.
Just worked over a qv-6700 fire department saw. They were used to cut vents in roofs on fire. Flywheel area was fkn covered in baked-on asphalt shingle crud, from cutting roofs
Saw seized up from scavenging flames. Flame damage to air intake too.
Sea foam deep creep softened that nasty tar oughtta the flywheel area. Enough to wipe it away with paper towel. Didn't even need to scrub with bristle brush.
Last edited by mainer_in_ak; 01/26/23.
