Originally Posted by 338Rules
Originally Posted by Yukoner
This beater Rem 300 H&H has the practical advantage of packing far more memories than any of the newer 300 magnums.

[Linked Image]

Not much to look at, the barrel has been bobbed to 22 1/2", and the front sight reinstalled, but the bore is still bright with sharp rifling. Not sure why it was shortened, but it still starts 180 gr Partitions off at close to 3000 fps.

The most practical reason to use it is you don't have to worry about scratching it up. smile

Ted



Is that even legal ? 22.5” minus 3-7/8” = about 17-3/4 “ of practical bore length ,
considering the scratches in the rifling at the muzzle from cleaning too exuberantly from the front end.

🥴


Whoever had it before I got it took very good care of the bore; bright with sharp rifling all the way, and still able to put a mag full into five inches at 300 meters, that's 328 yards for our friends down South, on our silhouette range.

You enjoying the cold in Alberta? Finally warming up here, -28 this morning. smile

Ted