Tell that to my shoulder. ha ha.. I was just in the shop freefloating the barrel on the pre 64. There was some pressure on it. As I relieved that area under the chamber, it lowered the barrel near the tip of the forend. Had to get the dremel out to speed things up a bit. Sanding that bedding out of the barrel channel is tedious work, even with 40grit paper over a deep well socket. Now it is completely freefloated. I'm thinking accuracy will be better now. In all, I agree it was a good day at the range. I found out what I wanted to know and am happy the stainless classic is shooting better now too. Its too pretty to not shoot well!!! The pre should do better next time out as well too.