mathman, I'm having no problem getting the powder in, I have about .25" of empty case neck when I'm done charging the case with the Varget. When comparing the case capacity, I used H380 as reference powder for max case capacity. When trickled in as carefully as I could in an RP case and a LC Match case the LC Match was .5 gr. less than the RP brass. They were trimmed to the same length and fired in the same chamber. I'm showing no pressure signs using this load in the LCM brass and I'm going with it. I'll weigh it before I take off for home tonight, I'll do an average of ten for you.
