Originally Posted by ready_on_the_right
Originally Posted by joshf303
Originally Posted by ready_on_the_right
I'm prolly going to build a 6.8 PRC sometime in the next year!

Hoping they'll start making more fast twist bullets besides just the Berger, but I'll live with that one if need be.


Mike



6.8 on the 6.5 or 300 PRC case?



Thinking .300 so I can neck down to crush fit in chamber and control headspace.

It's on the list, I have another rifle in parts I have to get put together a Remage, and I've got one just back from JKOB that I need to get into a stock...so It's on a backburner....I found out about a fairly close PRS match and I'm within 2 hrs of the CMP range in Talladega so should be able to stretch it a little.


Mike


Just thinking off the top of my head.... but I think you’ll be well over the maximum FPS they usually allow on steel targets.

And I don’t think I’d be wanting to shoot a 6.8/300 PRC in much positional shooting. YMMV though...

Sounds like a cool project anyhow.

Last edited by joshf303; 01/10/20.