Hondo, no Sir, these measurements were from bullet bases to end of ogive, cartridge base to ogive with bullets seated with base of shank to base of neck were the same caliper on a bench top rudimentary way.
140 RDF 2.395 147 ELD 2.385 150 SMK 2.370
Thinking the SMK needs to be the one chambered for, it's the shortest and will give more working room for the other bullets, haven't even looked at the 156 Berger EOL, or big Matrix bullet.
The dummy's are being sent with bare bullets taped to the outsides for the 'Smith to put some real [correct] measurements before he starts cutting.
