Originally Posted by Spotshooter
You argue like my Ex

Yes hombre .. you can make a AR cloverleaf if you really know how to accurize it and buy a decent barrel

Below - Regular AR.. lapped barrel, bolt lugs, bedded barrel extension, good trigger, … and a couple other things =
BTW - This rifle is already sold.. I built 4 that shot this way…
First shot is a fouling shot (which is crazy because the barrel isn’t broken in beyond me cleaning it up so it will shoot better with time)

[Linked Image]





Originally Posted by TWR
Originally Posted by Spotshooter
I posted pictures of the groups… and was trained by one of the best smiths…

But hey what do i know that you don’t… smile



Originally Posted by bsa1917hunter
Originally Posted by Spotshooter
I’m not sure about that - I can get most of them to shoot inside a dime at 100 yards with the right accurizing.




Originally Posted by wareagle700
I think you will be disappointed.
Expecting that accuracy from that type AR just isn't going to happen with a human behind the rifle.

Having said that, the most accurate barrel would be a high end custom with a tight match chamber and properly headspaced bolt. Why do you need a .5 MOA SBR???


Everyone can I guess. According to a lot of posts we used to hear about. I'm glad we don't hear the bs as much as we used to hear. That black rifle challenge, that certifiable mentioned, here kind of toned down that talk a bit.
Well for starters, where are the dime sized pics from your 8" SBR's?
Well pilgram around here we don't consider 3 shots a group but whatever...
This is a group
[Linked Image from i.postimg.cc]
I just found this barrel holding up a tomato plant.

Last edited by TWR; 12/07/22.