Did a lot of bed repair. Media blast, then I welded 21 different holes inside the bed area, a mix of drilled holes for things like an old drop ball goose neck plate, hole saw holes for electrical plugs, a 3"x7" hole for the old drop ball.. Solid bed but it was swiss cheese from things a previous owner had done.
I also put these D rings in for the kid, he hauls dirt bikes and stuff, might as well have decent strap points in each corner.
Doors are off too.
We put an old set of wheels and tires on for the rest of the dirty work. Some light blasting, the priming, painting etc.
One small hole below the dimmer switch that will need to be cut out and patched.