Originally Posted by prairie_goat
Originally Posted by SanCalPigHunter
Originally Posted by prairie_goat
Interestingly enough, Quickload has a wildcat with approx. the same case capacity as this round. Won't do even close to 2750 without getting into pressures too high for an AR (or at least one I'm shooting).


Keep in mind its not using a standard bolt.


So what kind of pressures can you run with this super bolt?


I really don't know what they are getting.

http://www.ar15performance.com/_6br___800_series_bolts

"The sets(only sold in sets) available currently use a standard thread .812-16TPI extension like most AR15s, The long extensions are not avail at this time. The bolt face allows the use of .473 or 308 rim sized cases in a AR15. The bolts fit any mil spec AR15/M16 carrier. The bottom 2 lugs are clearanced to pass over rounds in the mag. BR(308) diameter cases feed from 6.8 mags, either CPD or PRI mags allow loading to 2.295 OAL. 10 fit in a 15 round mag. 8/10/12"

[Linked Image]