Purty good Tinker,this evening.

Granting an OEM punchout 223AI Montucky some breathing room,to kiss 75'Max in formed cases. Issued COAL is right at trite and a kiss of same is 2.460"...so it were a snap to grant her 2.515" as padding,which was a .300" increase.

I like to shorten the bolt stop and flare the 'port. OEM follower comes out,700 goes in.

[Linked Image]

Total shim removal and quickaloo fab of a new one,that ain't EVER gonna [bleep] budge.

[Linked Image]
[Linked Image]

No thang to toss some wiggle room in the handle,so as to let 'er digest 5 rounds in the belly,with a 6th in the pipe...if only to ascertain feed/function.

[Linked Image]

The 6x MD Fixed [bleep] got peeled,for a 6x MQ version of same. A smorgasbord of worst case scenario fodder was rattled through the bitch,trying to make 'er bobble,with different boolit profiles,COAL,SB sized cases,SAAMI cases and Fullhouse formed case and she refused to slow the [bleep] down.

[Linked Image]

Can see where such things would grow on a gent.(grin)