My LOP is 13 1/4 inches. It was not hard, standard cut for the stock. I cut it close with a band saw and finish it with a disc sander. I wanted to use the stock pad as it is a pretty good one. Had to get a bit creative there and sand the lip off the pad where it goes against the stock. Have to be careful sanding the pad when finishing as the rubber is pretty soft.
I am no expert but it came out really nice and took me about 2 hours from start to finish.
Painted it after the stock work with Krylon Fusion paint, added the webbing. You then have to wait 7 days to clear it.
Now that all said, you are talking another 3/4 inch. I am not certain that is doable. I am leaving now for a funeral in Ohio, more later.
Last edited by TwoTrax; 10/24/16.
