Just a followup on the T3X stock. You are talking about another 3/4 inch from what I did. There is one thing that concerns me.
After cutting the stock and modifying the buttplate, while checking for fit I noted I could not get the screws for the buttplate all the way in. My initial fix was to simply drill the holes where they screw in a bit deeper, but something in there was hard and resistant to my drill, I was expecting soft plastic. So I ceased with that idea, only needed about 1/8 inch, so I simply shortened the screws and that worked perfectly.
So I am unsure of what lies deeper in those channels that are used to hold the screws for the buttplate, maybe some kind of metal for reinforcement? Just suggest that you proceed with caution and be aware of what I noted.
