Originally Posted by Orion2000
Originally Posted by R_H_Clark
Originally Posted by Lawdwaz
Originally Posted by Gus
Originally Posted by Orion2000
SAS,

First, I appreciate your effort for the special runs here on the 'Fire. Thank you !

In the future, when Left Hand Actions become an option, I would be in for a special run LH .243Win / 6.5CM / 6.5x55 / .270Win / 7x57, with #2 barrel contour, 1:8" twist. Preferably OD green with black pad on a dull (abrasive blasted) stainless rifle.

Again, thank you for your time and effort... And thanks to the Barrett folks for being willing to listen !!!



in the interest of unity or diversity or whatever, i second this recommendation. a left-handed anything would be useful, although right-handed stuff does work too.

a left-handed 6.5CM would probably be first choice, not ruling out anything else.



A long action .270, .280 or 30-06 would get me clicking the pen.........so where exactly do we send the deposit?


Are you talking LH? They already have 270- and 30-06 standard.



Do you have a link to the available LH Models ? Looking at the link below, all I found relative to Left Hand was:

Barret Link


"OTHER

When will there be a left-handed model?

Please monitor barrett.net for future product offerings."


Just looked at the link above and noticed 3 things that I liked:

1) Timney trigger from the get-go.
2) Very clean, tight, stock inlet for the safety.
3) Three holes on front receiver bridge to allow moving front scope base fore and aft as needed to best position the scope.

Obviously, some thought went in these...



I wouldn't hold my breath for a LH model. Here is an email I received from Barret this week "Due to high demand on the Barrett (right-hand) Fieldcraft rifles, Barrett will not be producing left-hand rifles at this time. We apologize for any inconvenience and we will gladly change your order to a right-hand rifle in any of the following calibers:"