Good thread and good info, thanks all for sharing.
I have played around a bit with a 45 super light... I run a flat bottom firing pin stop, a 20 lb recoil spring with a poly buffer thingy on the guide rod.
My load is a Lee 255 cast from wheel weights , powder coated and enough Unique to yield 900 to 950 fps. I can keep my ejected brass within 12'
So far so good...
I am going to fit the flat FP stop and put in the 20lb Wilson flat spring and give that load a try for this deer season. I won't have time to get the Clark kit and get it tuned up but it will happen. I replaced all the mag springs with Wolff +10% when I had the Rowland kit so should be good to go there.
