Wow! been having fun with a new 45 Super i sprung up, just bought the Springfield Garrison from HilhamHawk, Thanks Troy, it has a forged steel slide and grip frame along with ramped stainless match barrel, i ordered some parts from Wilson Combat and directly from Wolff Springs.
The setup:
Full length Wilson Combat guide rod
28lb Wolff recoil spring
X-tra power firing pin spring that came with recoil spring
Wilson Combat flat bottom firing pin stop
25lb Wolff hammer spring
I Just got a 20lb flat wire Wilson spring and flat firing pin stop with thoughts of setting up for +P or Super loads. Is 28lbs and the other springs required as well to handle it? I thought i had ordered a 24 but I got a 20. Don't want to beat the heck out of it. I really want to get another 460 Rowland setup, but from Clark this time. But if I can setup for the 45 Super that would carry me through deer season.
Well I got the EGW flat FP stop fit nicely and the 28lb mainspring was a bit of a trick but I didn't launch any parts. Unfortunately the 20lb flat recoil spring won't work with my guide rod, it needs one .250" diameter so I had to order a round wire one which puts me back a week or so. While I was at it I ordered an EGW base for my Holosun 507C because I struggle to see the front sight anymore.
Looking for 45 Super data for the 200-255 lead bullets for Blue Dot, Longshot, Unique, Bullseye, 700X or 2400. Those are the only pistol powders I have access to currently.
