APDFSNO864
My goodness that is a long moniker.
I have had too many malfunctions with M16 and Sako extractors. The problems are not limited to conversions of M700’s. Bolts supposedly made for those extractors, by rotating the ejector position on the bolt face, are just as bad.
It goes like this, open the bolt to eject fired case, case hits scope tube or turrets, case bounces back into action loading port, often backwards, action jams. I have had this happen at the worst possible times.
Never an issue with the original M700 extractor which tosses cases directly to the side. Likewise the sliding plate extractor on M70 push feed actions and offered by BAT side ejects.
I like Surgeon actions because they can be had with original M700 extractor plus are really well made.
Pretty hard to beat original M700 too.
Last edited by RinB; 02/19/18.
