Bret Ittel-- The secret is the wad column the faster and harder its pushed the better the seal and faster speed it creates with

lower internal case pressure to a point - i ran it up to 75 grns of steel powder melting cases getting crazy speeds of 3400-3600

fps but at this high the top of the plastic shotgun cases will melt and stick in the chamber but this is a after market pac nor

barreled savage 12 ga from hell with 3 locking lugs! - 12ga sabot, 500gr bullet-- --THIS FROM FB, GUYS STILL HAVING 12ga FH FUN


SC-ALL- If the brass cases you have are the thin Magtech they won't size down right to hold 12ga slugs,.

They are for shot with oversiize wads so that when loaded the outside of the cases fit chambers, Best to use longer plastic

as they are thick, fit chambers , and can be loaded with powders we use to any power level you want.

Or the expensive thick brass cases that fits and you can really go wild,,, ED

Ed Hubel