Originally Posted by mannyspd1
Gohip,

What was your cartridge overall length with the 270 TSX?

Thanks,

Manny

3.340" COL for the 375 ruger
I think 3.590 3.600" COL in the H&H
It can be accurate seated so you can crimp in the groove too, but I've always had the best accuracy seating right to the bottom edge of the crimp groove or just barely less so a sliver of the band of the bullet is showing

I also found that the TSX would would seat deeper in the case while in the magazine from recoil. It needs to be crimped at least a little in the 375 ruger

Last edited by gohip; 02/27/10.