Hey Jordan,
Everything was input correctly. What I have been doing on the Trajectory page is playing around with mock loads. I never have gone to the top and "reset defaults" before.
Something must get "stuck" in that page while you change bullets from the projectiles page.
Here's what Jonathan said,
"At the most basic, reset defaults and make sure the BC and MV are the same on both the site and in the app... should give you the same results with all default options and the same BC/MV. From there you can figure out what's different; could be zeroes, weather, spin drift, all kinds of things. If you tap on the action button in the upper right of trajectory, you can select 'reset defaults' which will reset it."
I simply did this and it worked. I asked him "why?" and he says,
"You likely had some default set that was throwing it off", whatever that means!
I put everything back in exactly as before and it worked....
?
