Originally Posted by bsa1917hunter
Originally Posted by GF1
I load 62 gr/RL26, R-P brass, Fed 210M with the 200 gr Partition for 2730 fps. I can detect no excess pressure and it is very accurate in my “custom” 30-06 with FN Mauser barreled action, 24” barrel.


Thats cooking along. Theres not a lot you wouldnt be able to put down with that load. For the guys mentioning the speers, good luck and a little helpful advice. Dont weigh those mo fo's. You might be in for an unpleasant surprise. As for the guy that shot a "sub moa" group with them. Pure luck, even if it was 1 lucky 3 shot group.


That's funny. I run the 200 gr. Speer Hot Cores in four different .300 Win. Mag. rifles, a Winchester M70 and three Ruger #1s, two "S" models and a "B" model. The worst of the bunch is one of the "S" model #1s and it's still 3/4" groups on average. The "B" model is usually good for a half inch or less as is the other "S" models. I've never had a problem getting accurate loads with the Speer bullets I've used.
Paul B.

Our forefathers did not politely protest the British.They did not vote them out of office, nor did they impeach the king,march on the capitol or ask permission for their rights. ----------------They just shot them.
MOLON LABE