For an old thread I did long ago using H 4831SC in the 06.... I got flamed but Nosler's Ballistician Mike, came on and stated you can't get enough 4831SC in an 06 case to exceed SAAMI specs.....
My load, which I have used in a Browning A Bolt. a 1903 Springfield, Remington 700, a couple of Model 70s, and a pair of 1917 Enfields..
62.5 grains of 4831SC, needs a crimp, I used a roll crimp....200 gr Sierra or Speer..
IIRC:
in a 22 inch barrel from the Browning.. 2850 fps...
24 inch Barrel Model 70s, 2900 fps
26 inch Enfield 1917 model, 2950 fps...
worked that up after I noticed what the pressure specs were for Book Published Loads with 4831.. and some one asked what was the most punch capable with an 06.
I tested that with both the 200 grainers and the 220 grainers...
if anyone tries it work it up from Load Manual specs
Max load with 4831/SC was 65 grains ( and definitely needed a crimp), and that was with a Hornady 190 SP....