It depends how fast you cycle the bolt... make it slow and the brass slips out of the extractor and it rest inside the action.
Cycle fast and usually it goes up. Sometimes hit the scope (not the turret. My scope is a VX-6 hunting scope) and end up inside the action. Sometimes is goes out.
I changed the extractor (Tubbs and McMillan extractors were tested), changed the extractor spring, and nothing did really corrected the problem.
Only way would be a longer claw on the extractor or to make the extractor cut on the bolt face a little deeper.
This, for me, is an obviously project flaw by Sako. They loose a customer with it.
