My Sako M995 TRG/S Magnum 30-378 had the same issue. I just used the high rings. Got no cheek weld either.

My BILs Remmy 788 did that when he put a new scope on it. I "fixed" it for him by rotating the scope in the rings 90 degrees CCW. The elevation turret went to the left side and became the windage turret, and the windage turret went on top and became the elevation turret. That way there was no turret sticking out over the ejection port for brass to hit on and bounce back into the loading port instead of on the ground. It worked and he was pleased. Guess it solved the problem to his satisfaction.


Our God reigns.
Harrumph!!!
I often use quick reply. My posts are not directed toward any specific person unless I mention them by name.