I dropped the engine and trans off for rebuild. 351W and an FMX, both 1973.

I've instructed the builder to target a static 10:1 with his piston selection, heads are 60.4cc comb chambers. He's looking for direction on the cam, I've been looking at comp cams XE262H.

http://www.compcams.com/Company/CC/cam-specs/Details.aspx?csid=877&sb=2

That's probably as wild as I care to go, We will be running a dual plane alum intake and prob 600-650 vac secondary 4 barrel, headers too, probably something mid length.

I like the lunati voodoo cams but I cover so many bases, being the body man, mechanic, painter etc. I want to buy a complete set including valve springs and I don't know that lunati offers it.

I'd like to run stock converter, this is a power assist brake car, weight is around 3000lbs, gears I believe are 3.23 (or possibly 3.5). 10:1 compression.

The stock cam for 1969 351M in Mach1 would have been ford #C9OZ-6250-A

[Linked Image]

Something clever here.