I plan to attack back half, then front half. I will support from front TB's and from the rocker pinch welds just forward of the rear TB's. I will do this on the adjustable pads of my hoist to level the body, they have individual screw adjustments.
I will remove the rear torque boxes first, I expect the LH inner rocker to need repair at the torque box interface, I can see it is bad before even removing the torque box. So, remove TB and the floor above it, repair inner rocker, install new torque box. Repeat on RH hopefully with no inner rocker repair needed. At that point I can move the rear hoist pads to the bottoms of the new torque boxes. Next I basically cut the back of the car off.
I guess it's too much to type out on an iPad tonight, basically I need to get the structure repaired before I can mount it on a rotisserie.
It's going to be a sumbich, you will just have to watch and see.
