Well, my back is still messed up, I'm walking around like Fred Sanford, not good.
But I managed to get a few things done today.
Started with the inner wheel house for LH side.
The new wheel house didn't match the shape of the original for splicing in a half like I planned.
So I cut it, tacked the top, pushed up hard so it lined up on top, then tacked the bottom. The problen is then the top split out, so I tacked a cheap vise grip in there spanning the gap, squeezed it together and tacked it.
Everything all welded up, trunk floor welds ground, starting to shape up.
Next I moved on to my rusty tail pan. I decided to save it.