We sourced our parts from the same places other custom builders do. All parts hand filed/ground/polished to fit. Frame rails machined undersized and hand filed/lapped for fit. Barrel hoods hand filed to fit, Feed ramps machined to proprietary angle, barrels throated, feed ramps hand polished, chambers finish reamed by hand to min headspace. Barrel bushings hand ground exterior and interior for proper fit to slide and barrel. tabs hand filed for tight friction fit. Sights hand filed and fitted. Extractors tuned for correct tension. Exterior blended and polished by hand. Trigger bows shaped, polished for smooth travel and interaction with disconnector. Disconnector hand polished for smooth operation. Sear springs polished and adjusted for proper tension/operation of grip safety, disconnector and 3.5 lb trigger pull. Trigger screw set for near zero overtravel.
I really don't want to type all this out for any of you dumb fuucks again. I built so many goddam guns the mere thought of it makes me want to puke. Read it and shut the fuuck up about it.
