Buy a Rockchucker, mine was $70 used and is from the 70's. The paint may flake or fade on them but they don't really wear out. Get a set of FL dies, I make all my brass from 270 brass necked up in one pass and trimmed to length, my dies are RCBS. Get a balance beam scale and a powder measure. A Lee priming tool will be way faster and less headache than fiddling with the primer arm on the press, they cost like $11.
Buy some RL15, 4320, 4895, or 4064, they'll all work though my rifle prefers 4064. I've never had primers make much difference in this caliber and mostly use the CCI34 because I got a deal on a bunch of them. 250gr bullets of your choice and you're pretty much all set.
I'd say if you shop smart and buy used dies and press, get the Lee primer tool and I even hear good things about Lee scales and measures though I haven't used them, you should be able to get into everything you need to start for $225 maybe less.
