What procedure did you use to tune the trigger.
The weight adjustment screw did not have sufficient effects, so employed a Dremel grinder repeatedly shaving a little (very technical term) off the stock spring. I think it was 6 rounds of grinding and reassembly finally getting it right at 1.5 lbs (Chatillon DFX2 Series Force Gauge). This sustains the flats on each end of one's spring as opposed to clipping curls.
I've grown extremely fond of light triggers as I've aged with a couple two-stagers (Anschutz) down in the ounce range and several other rifles with set triggers. Such are extremely nice in our Belding Ground Squirrel fields, but one should sternly warn others before handing a unit over.
I advise others to very gently approach them from the side as opposed to blindly initializing one's pull from the front.
