Good thread. Took me a while to read it, and I noticed several references to 56.5 grains of Re17 with 165s. I find that interesting as I am working up a load for a new-to-me .30-06 using this powder and 180-grain Partitions and it appears there is a node at 56.5 grains, but I need to do a little more shooting to verify it. I do know the velocity will be around 2840 or so. I just need to see if it really WILL shoot that load consistently.
I'd likely have gone with H4350, but had none on hand when this rifle came to me. I do have about 3/5 of a pound of Hunter on hand, but the only Ramshot powder I've seen available for quite some time was TAC.